Cypress EZ-USB Evaluation Board



Cypress EZ-USB Evaluation Board is an evaluation board for EZ-USB CX3 (CYUSB3065-BZXI), a bridge controller developed by Cypress Semiconductors. As a bridge controller, EZ-USB CX3 supports CMOS sensors, which comply with a MIPI CSI-2 interface, and outputs captured image data to any USB 3.0 host. This evaluation board comes with a dedicated 13.1-megapixel CMOS sensor module, which capable of capturing high-resolution image. Because of USB3.0 connection, the captured images are transferred to a host device at high speed. To use the application development tool, which is designed for CX3 and produced by Cypress, Cypress EZ-USB Evaluation Board can help to develop own camera device, which is equipped with EZ-USB CX3 as well as USB3.0.


  • Cypress EZ-USB Evaluation Board
    • USB3.0 Controller: Cypress EZ-USB CX3 (CYUSB3065-BZXI)
      (CPU and USB physical Layers (PHYs) are integrated)
      Programable CPU
      • ARM926EJ-S Core (32bit、200MHz)
      • 512KB SRAM
      USB physical layers (PHYs)
      • Support USB3.0 as well as USB2.0
    • MIPI CSI-2 interface
    • A USB Connector: Comply with USB 3.0 v1.0 standard (Supporting USB3.0 and USB2.0)
    • Supporting video data formats
      • User-defined 8bit data
      • RAW8/10/12/14
      • YUV422 (CCIR/ITU 8/10bit) YUV444
      • RGB888 / 666 / 565
    • Develop original firmwares with EZ-USB FX3 SDK, which developed by Cypress
    • UART, I2C, IS2, and SPI connections are optional (Require to solder connectors onto the board)

  • Dedicated Camera Board (Included)
    • 13.1-Megapixel CMOS sensor
    • MIPI CSI-2 interface
    • Resolution
      • 30fps @ Full resolution
      • 60fps @ 1080p
      • 60fps @ 720p
      • 120fps @ VGA